Softaculous Webuzo is a single user APPS Panel which you can use to install 100s of applications. Installing Webuzo is very simple. This guide shows you how to install Webuzo on a newly installed Operating System.
- Newly installed CentOS 6.x / 7.x or Red Hat Enterprise Linux 6.x / 7.x or Scientific Linux 6.x / 7.x (x86_64) / Ubuntu LTS
- YUM / apt-get / tar / wget packages installed
- RAM - Minimum 1 GB (Recommended 2 GB for best performance)
- Disk Space - Minimum 5 GB (Recommended 10 GB for best performance)
- Open Ports - 2002, 2003, 2004, 2005, 21, 22, 25, 53, 80, 143, 443 and 3306 (It is recommended to keep these ports open on your server)
Note : There should be no PHP, Apache, MySQL installed on the server
Open a Shell Terminal (e.g. PuTTY) and SSH to your server. Run the following commands:
wget -N http://files.webuzo.com/install.sh chmod 0755 install.sh
./install.sh // This will install the LAMP Stack, DNS Server and FTP server along with Webuzo
./install.sh --install=lamp,bind // This will install the LAMP Stack(softname -> lamp) and DNS Server (softname -> bind) along with Webuzo. Note : softname for Apps should be comma separated. Get list of softnames for the Apps here : http://api.webuzo.com/apps.php
./install.sh --install=none // This will install only Webuzo without any LAMP Stack. You can later install apps from the Apps Category in the Enduser Panel.
The installation will begin immediately. It may seem that the installation has stopped, if your network speed is slow, but please let it continue. You will see something like this :
This will setup the required Web Server and other important configurations. Note : A log file of the installation process will be created - /root/webuzo-install.log
After the installation is completed you will have to do the Initial Setup.
You will need to enter the Username, Email Address and Password, etc for initially configuring Webuzo.
Domain and Nameservers
Please enter a valid Domain Name say example.com.
You will need to point your nameserver to the servers IP where you are installing Webuzo. Webuzo will ask you for the Primary Nameserver (e.g. ns1.example.com) and the Secondary Nameserver (e.g. ns2.example.com).
Use IP as Domain
If you dont have a valid domain then you can use your servers IP as the hostname. Webuzo will also suggest you which the IP of your server. In such a case you can enter any dummy NameServer and your primary and secondary name server.
Submit the details
After you have filled in all details please submit the form.
Webuzo will start configuring the server immediately. This may take 3-4 minutes depending on your servers speed.
You will see a screen as follows when the initial setup is finished.
Webuzo has two sections :
The username and password will be the same that you entered during the Initial Setup
Just a Screenshot !
Here is a Video